TY - JOUR
T1 - Effect of Carrier Materials for Active Silver in Antibacterial Powder Coatings
AU - Zhang, Haiping
AU - Cui, Jixing
AU - Yang, Jiayuan
AU - Yan, Hui
AU - Zhu, Xinping
AU - Shao, Yuanyuan
AU - Zhang, Hui
AU - Zhu, Jesse
N1 - Publisher Copyright:
© 2024 by the authors.
PY - 2024/3
Y1 - 2024/3
N2 - Environmentally friendly powder coatings which have the advantages of being VOC-free, low-cost, and high-efficiency with a high recovery rate have been attracting increasing research attention. The introduction of antibacterial agents into the powder coatings endows them with a capacity to kill bacteria and viruses on the surface of objects; additionally, this enables them to inhibit the indirect transmission of pathogenic microorganisms. Silver, possessing broad-spectrum, strong, and stable antibacterial properties, is considered to be a promising antibacterial material for use in coating applications. Carrier materials for active silver play an important role in its activity and stability. However, there is a lack of systematic studies on the effects of different types of carriers in such coating systems, especially in green powder coating systems. In this paper, we investigated two types of carriers for active silver agents: zeolite, i.e., Linde type A (LTA) zeolite and Y-type zeolite; clay-based materials, i.e., montmorillonite and vermiculite. All the agents showed high antibacterial activity, with antibacterial rates of over 99% as compared to commercial agents. Among the four agents, the Ag-LTA zeolite antimicrobial agent showed a reduction rate of over 99.99%; additionally, it maintained a reduction rate of 99% after seven washing cycles. Thus, this agent was demonstrated to have the highest effectiveness and high durability; these features can be attributed to the high silver content and small particle size. The LTA zeolite also provides a protective effect for silver ions, protecting them from reduction, due to the restriction of elemental silver formation within the confined interior space of the α-cage structure. The Y-type zeolite antimicrobial agent exhibited a slightly lower antimicrobial performance due to its higher silicon-to-aluminum ratio and its lower cation exchange capacity. Comparatively, antimicrobial agents utilizing clay-based carriers have lower cation exchange capacity, resulting in poorer antimicrobial effectiveness than zeolite carriers. In addition, silver loaded on clay-based materials is prone to detach from the carrier and undergo a reduction reaction, making the coating yellowish in color. This study first provides information on the roles of different types of carriers in powder coating systems; then, this information guides the selection of carriers for active silver for the development of efficient antimicrobial agents and coatings.
AB - Environmentally friendly powder coatings which have the advantages of being VOC-free, low-cost, and high-efficiency with a high recovery rate have been attracting increasing research attention. The introduction of antibacterial agents into the powder coatings endows them with a capacity to kill bacteria and viruses on the surface of objects; additionally, this enables them to inhibit the indirect transmission of pathogenic microorganisms. Silver, possessing broad-spectrum, strong, and stable antibacterial properties, is considered to be a promising antibacterial material for use in coating applications. Carrier materials for active silver play an important role in its activity and stability. However, there is a lack of systematic studies on the effects of different types of carriers in such coating systems, especially in green powder coating systems. In this paper, we investigated two types of carriers for active silver agents: zeolite, i.e., Linde type A (LTA) zeolite and Y-type zeolite; clay-based materials, i.e., montmorillonite and vermiculite. All the agents showed high antibacterial activity, with antibacterial rates of over 99% as compared to commercial agents. Among the four agents, the Ag-LTA zeolite antimicrobial agent showed a reduction rate of over 99.99%; additionally, it maintained a reduction rate of 99% after seven washing cycles. Thus, this agent was demonstrated to have the highest effectiveness and high durability; these features can be attributed to the high silver content and small particle size. The LTA zeolite also provides a protective effect for silver ions, protecting them from reduction, due to the restriction of elemental silver formation within the confined interior space of the α-cage structure. The Y-type zeolite antimicrobial agent exhibited a slightly lower antimicrobial performance due to its higher silicon-to-aluminum ratio and its lower cation exchange capacity. Comparatively, antimicrobial agents utilizing clay-based carriers have lower cation exchange capacity, resulting in poorer antimicrobial effectiveness than zeolite carriers. In addition, silver loaded on clay-based materials is prone to detach from the carrier and undergo a reduction reaction, making the coating yellowish in color. This study first provides information on the roles of different types of carriers in powder coating systems; then, this information guides the selection of carriers for active silver for the development of efficient antimicrobial agents and coatings.
KW - antimicrobial agent
KW - carrier
KW - clay
KW - powder coating
KW - silver
KW - zeolite
UR - http://www.scopus.com/inward/record.url?scp=85188804692&partnerID=8YFLogxK
U2 - 10.3390/coatings14030297
DO - 10.3390/coatings14030297
M3 - Article
AN - SCOPUS:85188804692
SN - 2079-6412
VL - 14
JO - Coatings
JF - Coatings
IS - 3
M1 - 297
ER -