Structural optimization of photoacoustic transducer with PDMS/CSNPs nanocomposite for fatigue crack detection using laser-induced nonlinear surface waves

Zhijun Yao, Yehai Li, Gaolong Lv, Dan Chen, Jian Yang, Shifeng Guo

Research output: Journal PublicationArticlepeer-review

2 Citations (Scopus)

Abstract

Laser ultrasonics is a promising non-contact inspection technique but faces challenges of low signal-to-noise and low amplitude under non-destructive thermoelastic regime. In this paper, a laser ultrasonic surface acoustic wave (SAW) modulation method and photoacoustic transducer (PAT) are proposed and combined with nonlinear wave mixing technique to inspect microscale fatigue crack. PATs comprised of candle soot nanoparticles and polydimethylsiloxane are systematically optimized and combined with a line-arrayed laser source to generate desired high-amplitude and pure fundamental SAWs. Two modulated SAWs with frequencies of 2.1 and 2.9 MHz are excited on a fatigued aluminum plate to generate nonlinear mixed components, and the ultrasonic responses over the fatigue crack regions are acquired with a scanning laser Doppler vibrometer. The localization of fatigue crack with microscale is eventually achieved by mapping the nonlinear parameter of the mixed components, which proves it a reliable and non-destructive technique to inspect the fatigue crack.

Original languageEnglish
Article number112635
JournalMaterials and Design
Volume238
DOIs
Publication statusPublished - Feb 2024

Keywords

  • Fatigue crack
  • Laser ultrasonics
  • Narrowband generation
  • Nonlinear surface wave mixing
  • Photoacoustic transducer

ASJC Scopus subject areas

  • General Materials Science
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Structural optimization of photoacoustic transducer with PDMS/CSNPs nanocomposite for fatigue crack detection using laser-induced nonlinear surface waves'. Together they form a unique fingerprint.

Cite this